Home Made Sausage Rolls

I've had this recipe for a few months and I finally tried it. 

Beef and sausage roll

Few people can resist the lure of crispy pastry! Add the savoury succulence of a herby sausage filling and you are onto a winner with the family. Sausage meat can be fatty and all meat is expensive. This super stretcher recipe combines lean beef mince with the sausage meat for a healthier option and stretches 500g of meat into 8-10 serves.

      250g sausage meat

      250g lean beef mince

      1 tsp mixed herbs

      1 onion, chopped

      2 medium potatoes, scrubbed and boiled till tender

      ¼ cup tomato sauce

      ¼ cup chutney

      2 sheets of frozen puff pastry or a block of pastry (home-made short crust will also work if you have no frozen pastry)

      1 egg for glazing - optional

Preheat the oven to 220°. Prepare the pastry by brushing a little water along one edge. Overlap the wet edge with the second sheet of pastry and press firmly (I roll over the join a few times with the rolling pin). If using block or home-made pastry roll it out to roughly 50cm long and 24cm wide.

Chop the onion and combine with the sausage meat, beef mince and herbs, this can be done in a food processor. Slice the cooked potatoes into ½ cm slices. Combine the chutney and tomato sauce.

Brush a little water down one long side of the pastry. Spread the sauce mixture over the pastry not quite to the edges. Form the meat mixture into a sausage shape down the middle of the pastry, flattening it slightly so it is compact. Place the potato slices on top of the sausage and carefully wrap the pastry around the filling. Stretch the pastry a little if you need to, to accommodate the filling. When you have joined the pastry along the length of the roll as best you can (don't worry if it's not perfect) carefully lift (using a long spatula) or slide the roll onto a greased baking tray, you may need to place it diagonally. Beat the egg lightly and brush over the pastry, then use a serrated knife such as a bread knife to cut slashes into the pastry top at 1 ½ - 2cm intervals. Bake in the preheated oven for 25-35 minutes or until pastry is a rich golden brown. Slice and serve hot or cold with vegetables or salad.

Cook's tips:

We get at least 8 adult serves (2 slices per person) from this when we serve it with side dishes. If you are feeding little people you'll get even more. If you don't want to waste an egg on 'glazing' the pastry, just brush it with milk.

***************************************************************************************

However, I'm a bugger for changing things around to make them more healthy, and doubling recipes so I'm not forever cooking, so I added a few veges, popped in a half a cup of finely ground oatmeal to compensate, mixed all the ingredients together and made them regular sausage roll size.

The filling turned out a little soft, even though I let it cook for a bit longer so maybe I should have added more oatmeal but possibly it was the sausage mince was too fatty.

Ah well, they taste nice and one half of the mix is curried so there's a bit more variety :)! Shame the poor light doesn't make them look as good as they taste.

Cheers, Rob xo.

My First Tutorial - A Denim Tote

I'm a moderator on the DTE forums and as part of the Skills Challenge 2013 I volunteered to do a sewing thread on Reusing/Recycling/Remaking clothing. Thinking a bag was a handy thing to have, and a denim tote bag would be doing the 3R's on an unwearable pair of jeans, I scoured the net for a written tutorial on the type of bag I wanted to showcase and the tute also had to be beginner friendly.

No such luck unless it was a video. Now what beginner with not a lot of machine sewing experience wants to try and watch a video, some of which assumed the viewer knew sewing terms and a lot of basic skills, and sew something they've never made before at the same time? Add to that I have satellite internet and know quite a few others who share this "affliction" so 10 minute plus videos that don't have all the steps clearly layed out are a waste of precious expensive download.

That left me with one course of action - make my own tutorial. 

So here it is for those of you who aren't already members of the DTE forums.


A Simple Denim Jeans Tote Bag 

Basic Requirements 
An old pair of jeans – whatever size you want your bag
An old fabric belt 
Quick unpick – also known as seam ripper....just in case!
Scissors or rotary cutter and cutting board
Pins and pin cushion
Ruler, tape measure or sewing/quilting rulers /squares
Pencil or marking chalk 
Sewing machine 
Thread for machine.
Machine needles for denim size 90/14 or 100/16 depending how thick/heavy the denim is.
Iron – this can be made without the use of an iron but I find it easier to do so and a place to iron (ironing board, blanketed table etc)

Note: All side seams and hems are 1/2'” wide and I backstitch at beginning and end of each row of stitching to secure it.

 Here we go!

Hoping you’ve already set up your machine to sew denim re stitch length etc . 

First cut the jeans. You choose how big you want the bag to be but keep in mind that this will be a bag with boxed corners so allow extra for that. Mine are 18” square fabric pieces which will make a bag around 15”x 15” x 3” deep. I used size 16 (Australian measurement) ladies jeans . Cut one bottom section out of each jeans leg, leaving the inside leg seam intact. The thick outside seams are removed as they will be difficult to sew over. I unpicked the hand sewn leg hem as I needed that inch or so to do my new top seam.

Place the pieces right sides together and square them up, or you can make your own “ruler” from a big cereal box and use it.

Once they are squared clip a 1” long strip of fabric from the edge next to the existing seam. This will reduce fabric bulk when hemming.

Next is to press or fold down ½” doubled hems on this top edge of your bag. This is why I use the iron with denim or other heavy fabrics as it gives a better edge to sew along. Pin your hems and stitch close to the bottom edge, making sure you remove the pins before sewing over them or you could break your needle and damage your machine.

Now place the outsides of your bag facing each other, pin them together, then sew. I like to sew each side from top to bottom first, then sew the bottom seam together. I find there’s less fabric movement that way than going down one side across the bottom and up the other side. As the denim tends to fray you may want to stabilise it by overlocking (serging), using zig-zag or edging stitch like I did, or clipping with pinking shears if you own a pair. I also clip the corners on a diagonal before the stabilising stitch to make the corners neater when they are turned right way out.

Ready to make a box bottom? Ok, your bag should still be inside out so align the bottom seam and the side seam and finger or iron press. There should be a point formed. Measure 3” up from this point where the stitches meet, and mark a line. Pin to secure then sew along the line. Do the same thing to the other corner. It’s optional whether you clip off these points about ½” from the seam or fold them to the inside as support and hold them in place with a few stitches like I do. This is where it’s handy to have a free arm on your machine.

To ensure your bottom thread doesn’t become tangled underneath turn the wheel on the side of your machine to take a stitch and when the needle returns pull the bobbin thread through the material to the top, just as you’d do if you’d just rethreaded the machine. This means both threads are now on top and you can hold them when you begin stitching.

Inside of box bottom

 Outside of box bottom

I purchased a belt for 20 cents at the op-shop to be my handles as I wanted short, strong, wide handles as this will be my bag for carrying cans, bags of sugar etc in when I shop. I removed the fastening and cut the end tab off then singed the partly acrylic raw edges so they won’t fray. No, I didn’t provide protection for the table but yes, I have done this before so I knew this one wouldn’t drip. I usually do it over the empty stainless steel kitchen sink for safety reasons.

When you have cut the handles to the size you require and sealed them, or secured the ends with stitching, measure 3” in from the side seams and make a mark. Pin the outside of your handle ends here and have 1” protruding past the bottom of the top hem as this is the area you will sew in to attach them.

Sew the handles on by stitching a square to secure them firmly. If you’re not familiar with this what you do is stitch almost to the edge of the handle, parallel to the hem, stop the machine with the needle still lowered in the fabric, raise the presser foot, turn the bag until it is in position to sew down the side of the handle, lower the presser foot and repeat. 

Your finished bag should resemble this one.

Hope everyone has fun trying this!

Feel free to link or copy for your own use but don't claim it as your own because, after doing one myself, I now have great respect and admiration for those who offer written tutorials as stopping and starting to take photos, editing the photos by cropping/resizing and just writing the tute so it makes sense is quite a lot to do!!

I do think at least a mention of my blog, and possibly a link to the tute here if you feel so inclined, is not much to request :).

Cheers, 
Robyn xo

Footnote: If anything is unclear in the tutorial, please message me. 

Treechange?

I know I haven't posted much lately but this was not a usual occurrence and I just had to share :). I had a nice surprise this morning when some of our seachange neighbours decided to spend the morning having a treechange and visit the farm. I've identified them as best I can from my bird book but no guarantees it's correct as the Australian pelican is the only one that I've seen here on infrequent occasions previously. Love the shy skinny friend that was invited along :). I'm thinking the eurasian coot may already be a sneaky visitor though and the one who dives out of sight if the dog is with me!
Ducks, well a duck is a duck and in Winter the plumage isn't very distincitive.

The pelican enjoying the sunshine and the still but not very warm air. See the new visitor hiding behind the tufts of grass.

LOOK, my hydrofoil impersonation!

That's better. Dam water is damn cold on your feet! 

Not a very good photo as I couldn't venture any closer without risking my subject flying off. I think this is a Pacific Heron but would be grateful for any advice from someone more knowledgeable about these things.

Lol, just cooting around pretending I can't be seen!

   

A duck is a duck but I think these are Chestnut teal because of the white feathers on the side and the dark heads. Looks like 3 young bachelors. Chestnut teal are quite common in Australia but usually we just have here what we call wood ducks.  So many of them look similar until they fly off and, if you're quick and close enough, you can see any white patterning under the wings to identify them. I didn't want to spook these into flight as I didn't want our seachangers to be disturbed.
It's awful to have a holiday and discover the occupiers of the place next to you are noisy hooligans!

Hoping you enjoyed  the visitors as much as I did :D.
Cheers,
Rob xo

Birthday treats

Today is my Grandson's birthday and  a friend of mine recently shared, on her facebook page, a birthday food treat she'd found. I thought it was ideal for a 6 yr old and made him some to share at his party. The teddy cars disappeared very quickly!

Sorry for the poor quality photo but it's very overcast here today.

I'm going for a walk (waddle?) now to burn off all the calories from the birthday food *roll eyes*!

Cheers, 

Robyn xo